Pinecil V2 is a smart portable soldering iron built around a RISC-V processor and open-source IronOS firmware. It can be powered via USB-C PD/QC 3.0 or a DC5525 connector and is designed for bench work, electronics repairs and field use.
Pinecil V2
ASIN B09B3XGWJG
PINE64 Pinecil V2
Compact, fast and configurable: it reaches operating temperature in about 6 seconds, with an adjustable tip temperature from 100 to 400°C.
- USB-C PD/QC 3.0 or DC5525, 12–24 V
- Supports up to 88 W
- 0.69″ OLED display and Bluetooth connectivity
- IronOS on a Bouffalo BL706 RISC-V SoC
- Short conical ST-B2 tip included
- 28 g with tip fitted
Options and accessories
The standard configuration includes a short ST-B2 tip. The following PINE64 accessories are sold separately; availability and bundle contents may vary.
Short fine-tip set
Four profiles—BC2, C1, ILS and KU—for precision electronics work.
Short large-tip set
Four profiles—I, C4, D24 and K—for larger joints and greater heat transfer.
Silicone USB-C cable
Flexible 1.5 m USB-C-to-USB-C cable designed for bench use.
Power supply
For best performance, PINE64 recommends a 65 W USB-C PD power supply rated at 20 V / 3 A. Alternatively, use the 12–24 V DC5525 input with a supply rated at 3 A or more. Use only one power input at a time.
Frequently asked questions
Which tip is included?
Are the power supply and cable included?
Which tips are compatible?
Technical sources
Specifications and compatibility have been checked against PINE64 documentation.